Guaranteed Success in Dell EMC DES-3128 Exam Dumps
EMC DES-3128 Daily Practice Exam New 2023 Updated 62 Questions
EMC DES-3128 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
NEW QUESTION 24
A backup administrator wants to use an mminfo utility to run a query for several save sets from a NetWorker client running Windows 2019 However, they receive an error that the mminfo executable is not found.
What is the fastest way to resolve this issue?
- A. Install the NetWorker Extended Client package.
- B. Open a case with Dell Support
- C. Use a Windows Explorer to find the mminfo.exe file
- D. Use an nsrinfo utility instead
Answer: A
NEW QUESTION 25
An administrator wants to use block-based backups on a Windows client. They have already installed the NetWorker client software package on the system Which statement describes the need for an additional NetWorker package to enable Block-based Backup support?
- A. Logical Volume Manager is required.
- B. No additional software is required.
- C. NetWorker Extended Client software is required.
- D. NetWorker Block-based Backup software is required.
Answer: C
Explanation:
To enable Block-based Backup support on a Windows client, the NetWorker Extended Client software package must be installed in addition to the NetWorker Client software package.
NEW QUESTION 26
An administrator wants to create a client "ABO" to back up alt critical volumes for disaster recovery. They want the backup utility to scan a volume or a disk m a file system and back up all the blocks that are in use in the file system Also, the user has a feature that allows for a single high-density file system to be spirt into multiple concurrent save sets to speed up the backup walk process. The client must send 6 save sets simultaneously in a backup.
Use the simulator to perform the task
When you have finished, continue to the next question.
Answer:
Explanation:
Send the feedback for this answer.
NEW QUESTION 27
An administrator added several new LDAP user accounts for backup configuration and monitoring tasks . The LDAP users have been authenticated in NMC.
Where must the user accounts be added so these tasks can be performed on the server?
- A. Users field of the Security Administrators group on the NetWorker server
- B. External roles field of the user groups on the NetWorker server
- C. Users user group on the NMC server
- D. Privileges field of the user groups on the NetWorker server
Answer: B
NEW QUESTION 28
Which devices support Block Based Backup?
- A. CloudBoost and ProtectPoint
- B. PowerProtect DD and Cloud Tier
- C. AFTD and PowerProtect DD
- D. Tape and AFTD
Answer: C
NEW QUESTION 29
Which command can be used to query the NetWorker media database and to export the fields as comma separated fields?
- A. mminfo -xc,
- B. mminfo -avot
- C. mminfo -m
- D. mminfo -csv
Answer: A
NEW QUESTION 30
An administrator already added a client "CLientA" This client has recently been assigned a second DNS named "ClientAB" When the backup ran, the following error is observed
"The client ClientAB is not in backup servers' clients list."
Use the simulator to resolve this issue
When you have finished, continue to the next question
Answer:
Explanation:
The steps to resolve the issue of the client "ClientAB" not being in the backup server's clients list are as follows:
Verify the client name:
On the NetWorker server, open the NetWorker Management Console.
Go to the Clients tab.
Verify that the client "ClientA" is present in the list of clients.
Verify that the client "ClientAB" is not present in the list of clients.
Update the client name:
On the NetWorker server, open the NetWorker Management Console.
Go to the Clients tab.
Click on the ClientA.
In the Client Name field, update the name to "ClientAB"
In the Client Address field, enter the IP address or hostname of the client.
Click on the OK button to save the changes.
Re-schedule the backup
Go to the Clients tab.
Click on the ClientAB.
Go to the Schedules tab.
Remove the current schedule and create a new schedule for the client.
Select the appropriate schedule for the backup.
In the Save Set field, select the save set that you need to backup.
Click on the OK button to schedule the backup.
Monitor the backup process
Monitor the backup process to ensure that it is running successfully.
Check the logs for any errors.
NEW QUESTION 31
A backup administrator has configured the backup of the All save set on a Linux host that contains a remote mount point. During the restore, the administrator did not see the mount point data but only local data What is the reason for this behavior?
- A. The save command did not include the -x option.
- B. Mount point backups require the extended client
- C. NetWorker does not support Linux mount point backup.
- D. The save command did not include the -X option.
Answer: A
NEW QUESTION 32
A DB2 database is running on an IBM AIX operating system. A customer asks an administrator to configure a backup with NetWorker.
How should the administrator respond?
- A. NMDA must be installed
- B. No additional module is required.
- C. NMM must be installed
- D. AIX backup is not supported
Answer: A
Explanation:
To configure a backup of a DB2 database running on an IBM AIX operating system with NetWorker, the administrator must first install the NetWorker Module for Databases and Applications (NMDA).
NEW QUESTION 33
A customer has configured 3 new Linux server named Server01 as a backup client. They cannot see any files backed up when a restore operation is attempted Use the simulator to resolve the issue.
When you have finished, continue to the next Question
Answer:
Explanation:
To troubleshoot why a customer cannot see any files backed up when a restore operation is attempted on their 3 new Linux server named Server01, the first step should be to check the log files for any error messages. The log files are typically located in the /var/log/ directory, but the exact location may vary depending on the operating system being used.
Next, the administrator should check the configuration of the NetWorker server to ensure that the server is configured correctly. This includes checking the client configuration for the Server01 and making sure that the correct client name is being used. Additionally, the administrator should make sure that the Server01 has the correct address and port information, as well as the correct credentials.
The administrator should also check the configuration of the server to make sure that the correct backup policies are being used and that the backup schedule is configured correctly. Additionally, they should check the configuration of the actual backup device, such as the tape library or disk array, to make sure that it is configured properly.
Finally, the administrator should check the filesystem of the Server01 to make sure that the backup files are actually being written to the correct location.
NEW QUESTION 34
Which virtual environments are supported by NetWorker to back up virtual machines?
- A. Citrix XEN and VMware
- B. KVM and Microsoft Hyper-V
- C. Microsoft Hyper-V and Citrix XEN
- D. VMware and Microsoft Hyper-V
Answer: D
Explanation:
NetWorker supports both VMware and Microsoft Hyper-V virtual environments for backing up virtual machines.
NEW QUESTION 35
Which NetWorker component is comprised of a single NetWorker Server, its clients, and storage nodes?
- A. save set
- B. protection group
- C. datazone
- D. media pool
Answer: A
NEW QUESTION 36
What is a part of a full backup in a Windows BMR recovery operation?
- A. UEFI Partitions
- B. Windows File System
- C. Critical volumes
- D. Windows Roles
Answer: B
NEW QUESTION 37
What cloud solution is designed for situations where workloads are running entirely in the cloud?
- A. Replication to the Cloud
- B. Backup from within the Cloud
- C. Backup to the Cloud
- D. Infrastructure-as-a-Service
Answer: D
Explanation:
Infrastructure-as-a-Service (IaaS) is a cloud solution designed for situations where workloads are running entirely in the cloud. IaaS provides users with access to virtualized computing resources, such as storage, networking, and computing power, through a cloud provider.
NEW QUESTION 38
An administrator notices that after a reboot of the storage node, the library and tape drives are no longer accessible.
What is the cause of this behavior?
- A. SCSI address changed
- B. FC address changed
- C. persistent naming enabled
- D. persistent binding enabled
Answer: C
Explanation:
This behavior can occur when persistent naming is enabled on the storage node. When persistent naming is enabled and the storage node is rebooted, the library and tape drives may no longer be accessible because the persistent naming is lost.
NEW QUESTION 39
An administrator wants to use block-based backups on a Windows client. They have already installed the NetWorker client software package on the system Which statement describes the need for an additional NetWorker package to enable Block-based Backup support?
- A. Logical Volume Manager is required.
- B. No additional software is required.
- C. NetWorker Extended Client software is required.
- D. NetWorker Block-based Backup software is required.
Answer: D
NEW QUESTION 40
An administrator has been asked to assess the options available from the NetWorker backup application.
The objectives are:
Greater efficiency with virtualized and pooled resources
IT resources can be provisioned on-demand and easily returned to the resource pool Quickly allocate computing resources to meet business demands Enhanced security and protection of information assets What should be recommended to the client?
- A. On-prem NetWorker and use CloudBoost Virtual Appliance for long-term retention
- B. NetWorker Virtual Edition and CloudBoost virtual;
- C. On-prem NetWorker with CloudBoost Virtual Appliance to improve recovery time objectives
- D. Complete Data Protection Suite as Infrastructure-as-a-Service
Answer: D
Explanation:
A Complete Data Protection Suite as Infrastructure-as-a-Service (IaaS) would meet all the objectives of the customer.
NetWorker Virtual Edition is a backup solution for virtualized environments, and it allows to backup virtual machines and virtual applications. CloudBoost virtual is a feature that allows the user to perform backups and recoveries to and from a cloud-based object store.
On-prem NetWorker with CloudBoost Virtual Appliance to improve recovery time objectives is also a good solution.
Complete Data Protection Suite as IaaS includes NetWorker, CloudBoost, and other Dell EMC Data Protection solutions and it allows the customer to:
Greater efficiency with virtualized and pooled resources
IT resources can be provisioned on-demand and easily returned to the resource pool Quickly allocate computing resources to meet business demands Enhanced security and protection of information assets
NEW QUESTION 41
A backup administrator was asked to configure a Microsoft Exchange server To which two types of devices can this backup be directed?
- A. Tape and PowerProtect DD
- B. Dell EMC Cloud Tier and Tape
- C. CloudBoost and PowerProtect DD
- D. PowerProtect DD and AFTD
Answer: D
Explanation:
A backup administrator can configure a Microsoft Exchange server to be directed to two types of devices: PowerProtect DD and AFTD (Advanced File Type Discovery). PowerProtect DD is a disk-based data protection solution from Dell EMC that provides backup, replication, and recovery for physical, virtual, and cloud environments. AFTD is an add-on that helps to identify, classify, and protect file types such as Microsoft Exchange and other applications in physical, virtual, and cloud environments.
NEW QUESTION 42
Which URL syntax is correct for NWUI?
- A. https//servemame 9090/webui
- B. https//servemame 9090/ui
- C. https//servemame 9090
- D. https //servemame 9090/nwui
Answer: D
NEW QUESTION 43
......
Test Engine to Practice DES-3128 Test Questions: https://examsboost.actual4dumps.com/DES-3128-study-material.html